6UP账号

| English | русский

400-060-9169

新聞分類

客戶服務

  • 400-060-9169
  • 濟南市歷城區工業南路2號
  • sale@zzzzqz.com
6UP账号增壓泵部件結構詳細解析

6UP账号6UP账号增壓泵利用大面積活塞端的低壓6UP账号驅動而產生小面積活塞端的高壓6UP账号。

6UP账号Gas booster pumps low-pressure gases large piston driven and produce the high pressure gas piston small area.


自動重啟工作時,6UP账号增壓器迅速往復工作?隨著輸出壓力接近設定壓力值時泵的往復運動速度減慢直至停止。并保持這個壓力,此時能量消耗很小,無熱量產生,無零件運動。當壓力平衡打破后,增壓器自動開始工作到下一個平衡。6UP账号增壓泵:http://www.sdjingtuo.com/

Automatic restart work, gas supercharger work back and forth rapidly with output pressure pump pressure value to set the reciprocating movement speed slow to a stop. And keep the pressure, the energy consumption is small, have no heat, no parts movement. When the pressure balance after the break, automatic start work to balance a supercharger.


6UP账号6UP账号增壓泵氣缸是驅動空氣工作的場所。氣缸為驅動空氣提供了一個密閉的空間,保證了驅動氣壓的有效性和可靠性。而且,由于液壓柱塞與氣活塞連在一起,氣缸的距離決定了液壓柱塞的行程。

Gas booster pump cylinder is driven air places of work. The cylinder provides a closed space for driving the air, to ensure the validity and reliability of the driving pressure. Moreover, due to the hydraulic piston and piston together, cylinder distance determines the hydraulic piston travel.


6UP账号液壓柱塞與液壓缸的配合,形成了容積可變的液壓腔體。這個腔體要求能耐高壓,且能與增壓液體相適應。正是腔體容積的可變性,才能實現吸液負壓和排液正壓。

6UP账号With the hydraulic piston and hydraulic cylinder, hydraulic forming cavity with variable volume. The cavity for resistance to high pressure, and can adapt to the pressurized liquid. It is the variability of the cavity volume, can realize the suction pressure and discharge pressure.


6UP账号進口單向閥從字面上看,進口單向閥是為了進液的。其實不是。如果是為了進液,那不要單向閥進液會更順暢。之所以要進口單向閥,是為了實現增壓。當液壓柱塞下移時,液壓腔體容積變小,腔體內液體壓力上升;由于進口單向閥的逆向截止作用,腔體內的液體無法從進口排出,壓力不被釋放,而是被存儲在出口之外。

6UP账号6UP账号增壓泵出口單向閥同樣的道理,出口單向閥也不是為了排液。之所以要出口單向閥,是為了實現負壓吸液。當液壓柱塞上移時,液壓腔體容積變大,腔體內形成負壓;由于出口單向閥的逆向截止作用,出口之外的液體無法從出口進入腔體;而腔體內的負壓,使得進口單向閥的鋼珠打開,液體從進口端進入腔體。